| MODEL | BUELL 1125CR 2010 |
| Year | 2010 |
| Engine Type | Four stroke, 72° V-Twin |
| Displacement / Capacity | 1125 cc / 68.7 cu in |
| Bore X Stroke | 103 x 67.5 mm |
| Compression Ratio | 12.3:1 |
| Cooling System | Liquid cooled |
| Max Power | 109 kW / 146 hp @ 9800 rpm |
| Max Torque | 111 Nm / 11.3 kgf-m / 81.9 ft-lbs @ 9000 rpm |
| Ignition | — |
| Induction | Dual 61 mm downdraft throttle bodies, DDFI III fuel injection |
| Start System | Electric |
| TRANSMISSION SPECS | |
| Lubrication | — |
| Gear Box | 6 speed |
| Clutch | HVA hydraulic vacuum assist clutch with slipper action |
| Final Drive | Belt |
| CHASSIS SPECS | |
| Frame | Aluminium frame with fuel in frame |
| Front Suspension | 47 mm Showa inverted forks, adjustable compression damping, rebound damping and spring preload |
| Rear Suspension | Showa coil-over monoshock, adjustable compression damping, rebound damping and spring preload |
| Front Brakes | ZTL 6-piston fixed caliper, 375 mm single-sided, inside-out stainless floating rotor |
| Rear Brakes | Single 240 mm disc, 2-piston floating caliper |
| DIMENSION SPECS | |
| Overall Length | — |
| Overall Width | — |
| Overall Height | — |
| Seat Height | 775 mm / 30.5 in |
| Wheelbase | 1384 mm / 54.5 in |
| Ground Clearance | — |
| Dry Weight | 168 kg / 370 lbs |
| Wet Weight | — |
| WHEEL SPECS | |
| Front Tyre | 120/70 ZR17 Pirelli Diablo Corsa III |
| Rear Tyre | 180/55 ZR17 Pirelli Diablo Corsa III |
| FUEL SYSTEM | |
| Fuel Capacity | 21.2 Litres / 5.6 US gal |
| Fuel Consumption | — |
| Top Speed | 243 km/h / 151 mph |
This is the 2010-listed 1125CR, the cafe-racer version of the 1125R, with the same engine and chassis figures as the 2009 bike. Sold among the last Buells built, it aimed at riders wanting sporty looks with a calmer riding position.
